TY - JOUR ID - TI - Effect of Blank Holder Force on Strains and Thickness Distribution in Deep Drawing Process تأثير قوة ماسك الغفل على توزيع الانفعالات والسمك في عملية السحب العميق AU - Ali Abbar Khleif AU - Karem Muhsin Younis AU - Ali Tuaimah PY - 2014 VL - 32 IS - 8 Part (A) Engineering SP - 2009 EP - 2019 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - This work aims to study the effect of the blank holder force on strains and thickness distribution along cup wall of drawn part in deep drawing process. 2-D model of cylindrical cup of (40mm) outer diameter, and (0.5mm) thickness made from low carbon steel (1008–AISI), has been developed. A commercially available finite element package (ANSYS14.0) was used to perform the numerical simulation of deep drawing process. The experimental work carried out using digital image processing technique. Five values of blank holder force =5, 7.5, 10, 12, 15 KN) were adopted. The numerical results of this model were compared with experimental results and the results show that, the value of the thickness and hoop strain at cup rim decrease with increasing blank holder force, while radial strain increases with increasing blank holder force. The best thickness distribution over all zones in produced cup obtained when using blank holder force with value =10 KN).

يهدف هذا البحث إلى دراسة تأثير قوة ماسك الغفل على وتوزيع الانفعالات والسمك على جدار القدح في عملية السحب العميق. تم المحاكاة باستخدام نموذج ثنائي الإبعاد لكأس اسطواني بقطر خارجي (40mm) وسمك جدار(0.5mm) من فولاذ منخفض الكربون (1008–AISI) وذلك باستخدام طريقة العناصر المحددة باستخدام برنامج (ANSYS 14.0). والعمل التجريبي نفذ باستخدام ألمعالجه الصورية حيث تم اعتماد خمسة أنواع من قوة ماسك الغفل =5, 7.5, 10, 12, 15 KN).. ومن مقارنة النتائج المستحصلة من خلال المحاكاة مع نتائج العمل التجريبي بينت النتائج العملية و المحاكاة أن قيمة انفعال السمك والانفعال المحيطي في منطقة حافة القدح تقل بزيادة قوة ماسك الغفل بينما الانفعال النصف القطري يزداد بزيادة قوة ماسك الغفل كما اظهرت النتائج العملية و المحاكاة أن أفضل توزيع للسمك على جدار القدح تم الحصول عليه بقوة ماسك غفل ذو قيمه ( = (10 KN. ER -