TY - JOUR ID - TI - Effect of Quenching Media on the Mechanical Properties and Abrasive Wear Resistance of (34Cr4) Steel Blade with Soil Texture Used in Agricultural Equipments تأثير وسط التقسية على الخواص الميكانيكية ومقاومة البلى الحكي لريش فولاذ (34Cr4) مع نسجة التربة والمستخدمة في المعدات الزراعية AU - Abbas S. Alwan PY - 2014 VL - 32 IS - 9 Part (A) Engineering SP - 2205 EP - 2215 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this paper, a study the effect of quenching media on the mechanical properties and abrasive wear has been done on steel blade (34Cr4) for agriculture equipment with soil texture. It has found that heat treatment technique is promising to improve the quality of agriculture equipments and components working in soil under dry conditions. Abrasive wear resistance is very important in many applications and it is directly correlated with hardness of metal surface. The heat treatments have large role to alter the mechanical properties and wear resistance of steel type (34Cr4). It was found that the wear resistance increases with increase hardness which increases with varying quenching media as follows; 38HRC, 56.6 HRC, 58.3 HRC and 60.6 HRC for as – received sample, caustic Soda (10%), engine oil and flaxseed oil respectively. It was found also that the wear resistance increases with decreasing toughness to values 48.3 J, 45 J, 40.2 J and 27J respectively. Wear was presented on the worn surfaces of the steels which were used in this work. All mechanical properties depended on microstructure which consists of martensitic structure and some amount of carbide particles.

في هذا البحث, تم دراسة تأثير وسط التقسية على الخواص الميكانيكية ومقاومة البلى الحكي لريش فولاذ ( 34Cr4 ) المعدات الزراعية المستخدمة مع نسجة التربة. وجد ان تقنية المعاملات الحرارية هي المسؤولة في تحسين نوعية الاجزاء والالات الزراعية في العمل بالترب في ظروف جافة. وتكون مقاومة البلى الحكي مهمة في تطبيقات كثيرة وهي ذات علاقة مباشرة مع صلادة سطح المعدن. ان المعاملات الحرارية لها دور كبير في تغيير الخواص الميكانيكية ومقاومة البلى لفولاذ نوع ( 34Cr4 ) . حيث وجد ان مقاومة البلى تزداد مع زيادة الصلادة باختلاف وسط التبريد مثل:, 60.6 HRC, 58.3 HRC, 56.6 HRC, 38HRCلاوساط تمثل بدون معاملات, لصودا 10%, زيت المحركات و زيت الكتان على التوالي. وجد كذلك ان مقاومة البلى تزداد عند نقصان قيم العساوة للمعدن عند قيم48.3 J , 40.2 J, 45 J 27J, وهي قيم طاقة الصدمة بمقياس شاربي تمثل عينات بدون معاملات , لصودا 10% , زيت المحركات و زيت الكتان على التوالي. ظهور البلى على سطوح الفولاذ البالية (التالفة) المستخدم في هذا العمل. كل الخواص الميكانيكية تعتمد على البنية المجهرية والتي تتكون من البنية المارتنسايتية وقليلا من حبيبات كاربيدية. ER -