TY - JOUR ID - TI - The Effect of the Addition of Natural Rubber to (U-PTE) Resin on some Mechanical Properties تاثیر اضافة المطاط الطبیعي لراتنج الالكاید على بعض الخواص المیكانیكیة AU - Wafaa Mahdi Salih وفاء مھدي صالح PY - 2014 VL - 32 IS - 9 Part (A) Engineering SP - 304 EP - 310 JO - Engineering and Technology Journal مجلة الهندسة والتكنولوجيا SN - 16816900 24120758 AB - In this research polymer was prepared from Alkyd resin (U-PTE) with ratio 100% the and natural rubber with ratio 30%. The mixing process was performed by hand lay-up method. Some mechanical properties were studied in this work which included (flexural bending, shear stress, Impact test (charpy method) . the results showed that the addition of natural rubber to (u-pte) resin with this ratio leads to become the brittle behavior and decrease in the shear stress increase the ability of material to impact because the blend materials become elastic .the flexural strength increase of blend two times comparing with its value of pure resin while the result of shear stress value of blend showed decreasing with ratio(43%) but the impact value of blend increased with ratio (20%) with it value before the blending.

تم في هذا البحث دراسة تأثير اضافة نسبة 30% من المطاط الطبيعي لمادة بوليمرية (راتنج الالكايد ) وتمت مقارنتها بالنتائج لاختباري متانة الانحناء واجهاد القص واختبار الصدمة بطريقة جاربي في الحالتين لنفس المادة البوليمرية النقية (بدون اضافة ) وقد تم الخلط باستخدام طريقة القولبة اليدوية ، حيث وجد إن إضافة هذا النوع من المطاط الى راتنج الألكايد بهذه النسبة يؤدي ان يصبح السلوك اقرب الى السلوك المطيليى وكذلك ان اضافة المطاط خفض من قيمة اجهاد القص وازدادت قابلية المادة الى تحمل الصدمات بسبب تحول الخليط من مادة هشه الى مادة مرنة ذو معامل مرونة أقل ومتانة أعلى ومطيلية اعلى . وسجلت قيم متانة الانحناء للخليط زيادة الضعف عن قيمتها للراتنج بمفرده وأظهرت نتائج اجهاد القص انخفاضا مقداره (43%) في حين قيمة الصدمة ازدادت بمقدار (20%) مقارنة بقيمتها الأصلية قبل الخلط. ER -