Film Cooling From Two Staggered Holes Rows of Opposite Injection Angles with Downstream Row Embedded In Arc Trench

التبریدالغشائي الناجم من صفي ثقوب متعرجة ذات فتحات نفث متعاكسة مع وضع الصف السفلي في شق قوسي

Assim H Yousif --- Humam Kareem Jalghaf

Engineering and Technology Journal مجلة الهندسة والتكنولوجيا
ISSN: 16816900 24120758 Year: 2014 Volume: 32 Issue: 1 Part (A) Engineering Pages: 1-12
Publisher: University of Technology الجامعة التكنولوجية


Experimental investigation of film cooling from two staggered rows holes,backward and forward; of opposite injection angles has been done. The forward holes row was embedded in arc trench. The aim of using arc trench is to enhance the poor mechanical properties of that in rectangular trench. The results of film cooling performance are given here in a form of adiabatic cooling film effectiveness and heattransfer coefficients. In the tests test warm air is blown through tunnel, and cold air through the plenum chamber. When the warm air flowed through the test section it heated the model downstream. Infrared camera is used to measure the model surface temperatures. The comparison with the same holes arrangements and same holes and trench dimensions between existing rectangular trench results and present arc trenchedshowed that the film cooling thermal performance for both cases are approximately very close with slight differences, these differences are more or less according to the values of blowing ratios.


film cooling --- injection angles --- arc trench --- effectiveness --- blowing ratio.