Table of content

Tikrit Journal of Engineering Sciences

مجلة تكريت للعلوم الهندسية

ISSN: 1813162X 23127589
Publisher: Tikrit University
Faculty: Engineering
Language: Arabic and English

This journal is Open Access

About

The Tikrit Journal for Engineering Sciences is not limited to a specific aspect of science and engineering but is instead devoted to a wide range of subfields in the engineering sciences. While it encourages a broad spectrum of contribution in the engineering sciences, its core interest lies in issues concerning material modeling and response. Articles of interdisciplinary nature are particularly welcome.
The primary goal of the new editors is to maintain high quality of publications. There will be a commitment to expediting the time taken for the publication of the papers. The articles that are sent for reviews will have names of the authors deleted with a view towards enhancing the objectivity and fairness of the review process.
Articles that are devoted to the purely mathematical aspects without a discussion of the physical implications of the results or the consideration of specific examples are discouraged. Articles concerning material science should not be limited merely to a description and recording of observations but should contain theoretical or quantitative discussion of the results. TJES now register in the following database:
TJES is indexed by DOAJ, getCited Database, WorldCat Database, ProQuest Database, Electronic Journals Library, J-Gate, and Google Scholar.
The DOI prefix: 10.25130

Loading...
Contact info

Phone number : 07701219659
E-Mail : tjes94@gmail.com
tahseen@tu.edu.iq

Table of content: 2015 volume:22 issue:1

Article
Alkaline Depolymerization of Polyethylene Terephthalate Plastic Waste
التحلل القلوي لمخلفات البولي أثلين البلاستيكية

Authors: Ammar S. Abbas
Pages: 1-8
Loading...
Loading...
Abstract

Depolymerization reaction is considered one of the most significant ways of converting waste polyethylene terephthalate in to terephthalic acid. The water polyethylene terephthalate bottle waste was collected from different places in Baghdad. The collection step shows that there is plenty amount of polyethylene terephthalate suitable to be an important source of terephthalic acid production. PET plastic waste conversion to terephthalic acid by depolymerization process was examined. The effect of ethylene glycol amount, reaction time (up to 90 minutes) and reaction temperature (from 70 to 170° C) on the polyethylene terephthalate conversion was obtained. The kinetic study shows that the ordination of the depolymerization reaction of PET is first order irreversible reaction with 31103.5 J/mole activation energy. A 97.9 % terephthalic acid purity has been obtained by purification with N, N-dimethylformamide.


Article
Behavior of High Strength Self Compacted Hollow Section Reinforced Concrete Beams under Pure Torsion
دراسة سلوك العتبات الخرسانية المسلحة المجوفة ذاتية الرص عالية المقاومة المعرضة لعزوم اللي الخالصة

Authors: Haneen Maad Mahdi
Pages: 9-23
Loading...
Loading...
Abstract

In this work, an experimental study has been conducted to investigate the behavior of high strength self-compacted concrete hollow beams under pure torsion. In this work, the beams were implemented and tested under pure torsion load. A total of six beams were tested. All beams were of the same cross section, the same length, the same concrete mixture and quality control. All beams were of external dimensions (300x300mm) and the hollow dimensions (180 x180mm) and all the concrete beams have the same number of main reinforcement 4Ф12 at the top and 4Ф12 at the bottom, the main variable is the stirrups spacing to investigate the effect of stirrups amount on improving of hollow reinforced concrete beams resistance against torsional moments. The six beams were subjected to pure torsion by using fabricated test machine to enable the application of the mentioned pure torsion load. Experimental results showed that, many structural properties of the beams are improved, by decreasing the stirrups spacing. Highest improvement achieved for ultimate torsional moment (Tu) followed by cracking torsional moment (Tcr) and then by angle of twist (Ø) while the improvement of beam's concrete strain (ε) came at last. The percentage of improvements of the mechanical properties of the beams due to decrease of the stirrups spacing according to the reference beam is:  For Tu ranges between (25.7-254.3) %.  For Tcr ranges between (25-200) %.  For Ø ranges between (23.3-76.0) %.  For ε (29.0-50.2) %. The considerable increase in Ø and ε before failure makes the increase of stirrups preferable for safe life and attaining attention.


Article
Development of Artificial Neural Network Model of Crude Oil Distillation Column
تطوير موديل بواسطة الشبكة العصبية الصناعية لوحدة التقطير الجوي للنفط الخام

Loading...
Loading...
Abstract

Artificial neural network in MATLAB simulator is used to model Baiji crude oil distillation unit based on data generated from aspen-HYSYS simulator. Thirteen inputs, six outputs and over 1487 data set are used to model the actual unit. Nonlinear autoregressive network with exogenous inputs (NARX) and back propagation algorithm are used for training. Seventy percent of data are used for training the network while the remaining thirty percent are used for testing and validating the network to determine its prediction accuracy. One hidden layer and 34 hidden neurons are used for the proposed network with MSE of 0.25 is obtained. The number of neuron are selected based on less MSE for the network. The model founded to predict the optimal operating conditions for different objective functions within the training limit since ANN models are poor extrapolators. They are usually only reliable within the range of data that they had been trained for.


Article
Parametric Simulation on Enhancement of the Regenerative Gas Turbine Performance by Effect of Inlet Air Cooling System and Steam Injection

Authors: Aadel Abdulrazzaq Alkumait
Pages: 38-44
Loading...
Loading...
Abstract

Iraq being one of the developing countries of the world considers energy efficiency and the impact of its generation on the environment an imperative process in improvement of its power generation policies. Iraq bearing high temperatures all year long results in reduction of air density, therefore, Inlet air Cooling and Steam Injection Gas Turbines are a striking addition to the regenerative gas turbines. Regenerating Gas turbines tend to have a high back work ratio and a high exhaust temperature, thus, it leads to a low efficiency in power generation in hotter climate. Moreover, STIG and IAC through fog cooling have known to be the best retrofitting methods available in the industry which improve the efficiency of generation from 30.5 to 43% and increase the power output from 22MW to 33.5MW as the outcomes of computer simulations reveal. Additionally, this happens without bringing about much extensive change to original features of the power generation cycle. Furthermore, STIG and spray coolers have also resulted in power boosting and exceeding generation efficiency of gas turbine power plant.


Article
Analysis of Brushless DC Motor with Trapezoidal Back EMF with Matlab

Authors: Taha Hussain
Pages: 45-51
Loading...
Loading...
Abstract

The dynamic characteristics such as speed and torque as well as voltages and currents of pwm brushless DC motor inverter are analyzed with a MATLAB model. The contribution of external load torque and friction torque is monitored. The switching function technique is adopted for the current control of the embedded three phase inverter that drives the brushless DC motor. In switching functions the power conversions circuits can be modeled according to their functions rather than circuit topologies. Therefore, it can achieve simplification of the overall power conversion functions. The trapezoidal type (back emf) is used in the model as it has lower switching loss compared with sinusoidal type (back emf). Results show reliable time analysis for speed, torque, phase and line voltages and currents and the effect of current commutation is clearly observed.


Article
Prediction of RC multi-story construction performance with a new proposed design spectrum approach

Authors: James H Haido
Pages: 52-68
Loading...
Loading...
Abstract

The consideration of novel response spectrum analysis to check the reinforced concrete RC buildings resistance towards the seismic risks in Iraq has not been investigated so far. Due to the increasing of frequent earthquakes with moderate intensity in north of Iraq, caution should be taken into account in building design especially with considering the design codes. Where, there are no specific Iraqi standards of earthquake for building design. Thus, the proposing of new response spectrum relationship matching the properties of Kurdistan region (north of Iraq) soil is considered essential with considering of novel stiffness or inertia reduction factors for concrete sections. Present endeavor is devoted to develop new design spectra dynamic analysis of RC multistory building located in Duhok city-Iraq. Influence of proposed concrete section reduction factors on the analysis outcomes has been investigated also. Great role has been observed for introducing of stiffness reduction factors in present seismic analysis represent in magnifying of lateral deformation of building of more than 50%. Proper matching was obtained between current proposed spectrum design outputs and that for other analytical approaches

Keywords


Article
the Life Cycle Assessments of Gas Turbine using Inlet Air Cooling System
تحسين أداء ودورة حياة التربينات الغازية باستخدام منظومة تبريد الهواء الداخل

Authors: Thamir K. Ibrahim
Pages: 69-75
Loading...
Loading...
Abstract

The achievement of life cycle assessments of energy systems with both maximum power output and economical profits is considered as the main objective of operations management. This paper aimed to evaluate both of the performance of a gas turbine using an inlet air cooling system as well as its life cycle cost. Accordingly, a thermodynamic model and an economic model are developed respectively to derive an analytical formula for calculating the cooling loads and life cycle cost. The major results show that, the output power of gas turbines power plant with a cooling system is (120MWh) which is higher than that of gas turbines power plant without the cooling system (96.6 MWh) at peak condition; while the life cycle cost is lower in the case of gas turbines power plant with cooling system. Thus, the proposed methods show a potential cost reduction and achievable through changing the structure of the system.


Article
تحسين قابلية الخرسانة على العزل الحراري في درجات الحرارة العالية بأضافة مواد نانوية

Loading...
Loading...
Abstract

يتضمن هذا البحث دراسة عملية لمدى تأثير اضافة مواد نانوية ) غبار السيلكا النانوي والميتاكاؤولين النانوي( على قابلية الخرسانة للعزل الحراري في درجات الحرارة العالية مع تحسين الخواص الميكانيكية للخرسانة بأضافة تلك المواد النانوية ، اي الحصول على خرسانة ذات قابلية جيدة في العزل الحراري مع خواص ميكانيكية جيدة وهو نوع جديد من الخرسانة يختلف عن الخرسانة الخفيفة الوزن او الخرسانة التقليدية وبذلك يمكن الاستفادة من التحسينات التي تحدثها المواد النانوية على الخرسانة والمونة السمنية من ناحية العزل الحراري في المنشآت الحرارية والافران والمراجل من أجل الحصول على مواد عازلة جديدة ويمكن للقطاع النفطي والصناعي الاستفادة منها. تم في هذا البحث اضافة المواد النانوية الى الخرسانة بنسب وزنية مختلفة من وزن السمنت كما تم استخدام ملدن فائق لغرض المحافظة على قابلية تشغيل جيدة مع عدم تغيير المحتوى المائي للخلطات الخرسانية مع اضافة نسبة من الياف الكاربون المقطع، تم أجراء فحص مقاومة الانضغاط 627 درجة مئوية( ولمدة – ومعاير الكسر لمكعبات ومواشير الخرسانة النانوية قبل وبعد تعرضها لدرجات حرارة مختلفة تراوحت بين ) 52 ساعتين لبيان تأثير درجات الحرارة العالية على الخواص الميكانيكية للخرسانة النانوية . كما تم ايجاد معامل التوصيل الحراري للخرسانة النانوية المسلحة بمشبك الياف الزجاج )مشبك تسليح( ) Fiberglass mesh ( حيث اظهرت النتائج بصورة عامة تحسن كبير في قابلية الخرسانة على العزل الحراري .


Article
معالجة الخبث الناتج من محطة الضباعي بأستخدام أحواض التجفيف

Loading...
Loading...
Abstract

نظراً لعدم كفاية أحواض التجفيف الحالية الخاصة في محطة معالجة المياه الثقيلة في منطقة الضباعب-تكريت فقد تم أجراء هذه الدراسة لغرض تجفيف الحمأة بأستخدام أحواض التجفيف. تم في هذه الدراسة أجراء عدد من التجارب لأيجاد عمق الفرش الأمثل وكذلك لأيجاد وسط ترشيح مناسب من مواد محلية متوفرة أضافة الى دراسة تأثير المخثرات الكيمياوية على كفاءة التجفيف . تم تصميم حوض تجفيف ذو مواصفات خاصة حيث يوفر هذا الحوض أنحداراً معيناً بأتجاه وسط الترشيح .بينت النتائج أن عمق الفرش الأمثل هو 30 سم وأن وسط الترشيح المتكون من كسر الطابوق كوسط ساند والرمل كوسط مرشح قد اعطى أفضل النتائج . كذلك بينت النتائج أن اضافة المخثرات يؤدي الى زيادة كفاءة التجفيف وأن كلوريد الحديديك بتركيز 100 ملغم/لتر قد اعطى افضل النتائج. وبينت النتائج أيضاً أن كفاءة التجفيف تتحسن مع تقليل المقاومة النوعية للترشيح وتتحسن كذلك مع زيادة درجة حرارة الجو . كما بينت الدراسة أهمية وجود حوض تثخين ) Thickener Tank ( يعمل على زيادة كفاءة عملية تجفيف الحمأة في أحواض التجفيف وذلك من خلال عمله على تقليل كمية المياه المتواجدة في الحمأة.وبينت النتائج المختبرية أن تصميم أحواض التجفيف وفق مواصفات الحوض الخاص يؤدي الى تقليل المساحة المطلوبة لأحواض التجفيف الى النصف.أظهرت نتائج فحص العناصر الثقيلة للحمأة ان تراكيز العناصر الثقيلة اقل من الحد الاعلى المسموح به للحمأة لاستعمالها كسماد للاغراض الزراعية

Keywords


Article
Structural Behavior of Fibrous Reinforced Concrete Hollow Core One-Way Slabs Strengthening by C.F.R.P
دراسة السلوكية الانشائية للبلاطات الخرسانية المجوفة المسلحة أحادية الاتجاه والمقواة باستخدام الياف الكاربون

Loading...
Loading...
Abstract

A reinforced concrete hollow core one-way slab is one of the types of slabs used widely around the world in residential and industrial buildings to take advantage of them Economic and thermal insulation as well as to reduce the self-weight of the construction. The aim of the present study is to examine the structural behavior of the reinforced concrete hollow core one-way slabs reduce failure using the normal concrete and fibrous concrete and then strengthened using carbon fiber(CFRP) This study include molding of ( 6) specimens differ in terms of the voids volume (Vv) , volumetric percentage of steel fibers (

Keywords

Table of content: volume:22 issue:1