Search results:
Found 27
Listing 1 - 10 of 27 | << page >> |
Sort by
|
The ligand (4-(7-hydroxy-4-methylcoumarin-8-ylazo)-1-phenyl-2,3-dimethyl pyrazol-5-one 4-yl) derived from 4-aminoantipyrine and 7-hydroxy-4-methyl coumarin. The synthesized ligand was characterized by 13C, 1HNMR, FT.IR and UV-Vis spectra. Complexes of Fe(II), Co(II) and Ni(II) with the ligand were prepared in aqueous methanol with a (1:2) M:L ratio. The prepared complexes have been characterized by using flame atomic absorption, FT.IR, UV-Vis spectra as well as magnetic susceptibility and conductivity measurements. On the basis of physicochemical data octahedral geometries were attributed for the complexes.
هيدروكسي 4 مثيل كيومارين - - - - ( حضر الليكند ) 4– - - - - - - - 8 ايل ازو( 1 فنيل 2,3 ثنائي مثيل بايروزول 5- - - - - اون 4 ايل( من 7 هيدروسي 4 ميثل كومارين و 4امينو انتي بارين و شخص الليكاند المحضر بواسطة اطيافالرنين النووي المغناطيسي و الاشعة تحت الحم ا رء و فوقالبنفسجية المرئية. حضرت معقدات الحديد و الكوبلت و –النيكل الثنائية الشحنة مع الليكاند في وسط الميثانول وبنسبةفلز: ليكاند (2:1) ، شخصت المعقدات المحضرة باستخداماطياف الاشعة تحت الحم ا رء و فوق البنفسجية المرئية و –تقنية الامتصاص الذري، فضلا عن قياسات الحساسيةالمغناطيسية و الت وصيلية الكهربائية و من النتائج المحصولعليها تم اقت ا رح الشكل الثماني السطوح للمعقدات المحضرة.
4-aminoantipyrine --- azo dye --- coumarin
New azo dye was synthesized by reaction dizonium salt of sulfanilic acid with antimelaria drug (chloro quin diphosphate).This product was characterized by FTIR(Fourier Transform Infrared)andUV.Visible spectrophotometer .The antibacterial activities of the compound was studied and evaluated using gram positive and negative gram stain. The purity of the dye was checked by thin layer chromatography(TLC) using solvent system( sec.Butanol-water-acetic acid)(2:2:1).The melting point of the purified dye was measured in an open capillary tube. We have been concluded that the prepared azo dye showed antibacterial activity against this micro organism.
sulfanilic acid --- FTIR --- Azo dye
Decolorization of blue azo dye (Cibacron Blue FN-R) in simulated wastewater has been investigated as a function of solar photocatalytic process. Different parameters that affected on the removal efficiency, such as initial concentration of dye, pH of the solution, catalysis dosage, and H2O2 concentration, were evaluated to find the optimal operation conditions. From the experimental results, the desired pH value for solar photocatalytic V2O5 was 2 and the best catalysis dosage was 500mg/L. In addition, the most efficient H2O2 concentration was 100 mg/L for V2O5. The mathematical models that describe the photocatalytic process have been predicted by using response surface methodology (RSM). The decolorization efficiency by using V2O5 as solar photocatalytic can be reached to 97%.
azo dye --- photocatalysis --- vanadium oxide.
A spectrophotometric method for the assay of trace amounts of benzocaine was based on the reaction of benzocaine with nitrite ion to form the corresponding diazonium salt followed by coupling reaction with ethyl cyano acetate to form a stable and a soluble yellow azo dye with maximum absorption at 405 nm. Beer،¦s law was obeyed over the range 5-250ƒفg/25ml, i.e, (0.2-10ppm) of benzocaine and correlation coefficient 0.998 with a molar absorptivity of 3.1 „e104 L.mol-1.cm-1, a relative error of 0.0 to 0.25 % and a relative standard deviation of „b 0.03 to „b 0.38 %, depending on the concentration level. The method has been successfully applied for the assay of benzocaine in one pharmaceutical preparation (Lozenges).
الخلاصةتضمن البحث طریقة طیفیة لتقدیر كمیات متناهیة في الصغر من البنزوكائیین. وأعتمدت الطریقة على أزوتة البنزوكائیین وذلكبمفاعلته مع ایون النتریت بوجود حامض الهیدروكلوریك ثم اقت ا رن ملح الدایازونیوم الناتج مع كاشف الاقت ا رن اثیل سیانو اسیتیت لتكوینصبغة آزویة صف ا رء مستقره وذائبة في الماء، تم قیاس شدة الامتصاص للصبغة الناتجة عند الطول الموجي ٤٠٥ نانومیتر وكانت١٠ جزء - حدود قانون بیر في مدى التركیز من ٥ إلى ٢٥٠ مایكروغ ا رم من البنزوكائیین في حجم نهائي ٢٥ مل ( ٠.٢٤ ١٠ لتر. مول- ١. سم- ١، والخطأ النسبي ت ا روح بین /ملیون)وبمعامل ارتباط ٠.٩٩٨ وبلغت قیمة الامتصاصیة المولاریة 3.1% 0.38 اعتمادا على مستوى تركیز البنزوكائیین. تم تطبیق 0.03 و 0.0 و 0.25 % والانح ا رف القیاسي النسبي بین.(Lozenges) الطریقة بنجاح لتقدیر البنزوكائیین في احدى مستحض ا رته الصیدلانیة المحضرة
Spectrophotometric --- Benzocaine --- Azo-Dye Formation Reaction
The corrosion rates in the presence of thoron as a steel corrosion inhibitor in 1M HCl and 1M H2SO4, were measured by the weight loss method, potentiodynamic polarization measurements and quantum chemical calculations. The weight loss method was studied in different times (1-4 hr) and in the range of temperatures from 298 to 318 K. Results obtained revealed that thoron performed excellently as a corrosion inhibitor for C-steel in these acids media and its efficiency attains to 91.99% at 1x10-3M at 298 K, and by potentiodynamic polarization measurements its efficiency attains to 93.74% in the same conditions. The Langmuir adsorption isotherm was tested for their fit to the experimental data. The apparent activation energies, enthalpies and entropies of the dissolution process and the free energies and equilibrium constants for the adsorption process were determined and discussed. All the computed quantum chemical parameters are found to correlate well with experimental inhibition efficiencies of inhibitor.
تم قياس سرعة التآكل بوجود مركب الثورون كمثبط للتاكل للفولاذ الكاربوني في وسطين 1مولاري من كل من حامض الهيدروكلوريك وحامض الكبريتيك باستخدام طريقة الفقدان بالوزن وقياسات جهد الاستقطاب وحسابات كيمياء الكم. درست طريقة الفقدان بالوزن في ازمان (1-4 ساعات) ضمن مدى حراري 298- 318 كلفن. اشارت النتائج ان لمركب الثورون فعالية تثبيط ممتازة للفولاذ الكاربوني في هذه الوساط الحامضية حيث وصلت كفاءة التثبيط الى 91,99% بتركيز 1x10-3 مولاري وحرارة 298 كلفن. اما باستخدام قياسات جهد الاستقطاب فقد وصلت الكفاءة الى 93,74%. كما لوحظ ايضا، ان امتزاز الجزيئات على سطح المعدن يخضع لمعادلة امتزاز لانكماير. تم تعيين قيم الثوابت الثرموديناميكية، طاقة التنشيط وحرارة التفاعل والعشوائية لعملية ذوبان السبيكة وتم كذلك تعيين الطاقة الحرة وثوابت الاتزان لعملية الامتزاز، وتم مناقشة هذه النتائج. وجد هناك تناسق كبير بين القيم العملية لكفاءة التثبيط والقيم المحسوبة من كيمياء الكم.
corrosion --- azo dye --- thermodynamic --- quantum chemistry.
This work is concerned with studying the adsorption of some azo dyes better on commercial activated carbon. The dyes were synthesized by considering the resorcinol as constant part in their structure which is reacted with a number of para substituted aniline via dizonium ions and used as adsorbate for achieving this study. These dyes were identified by a number of physical tests and the available spectroscopic methods. Three models of adsorption isotherms namely, Freundlich, Langmuir , and Tempken are applied to fit the experimented data of adsorption at equilibrium in the range of concentration (1*10-4- 5*10-4)M at various temperatures (292-328)K, and using (1gm/L) of the Adsorbent (Activated Carbon). The results showed that, the Freundlich isotherm is better fitted to the experimental data of the studied systems, although Langmuir isotherm exhibited good fit. This work included performing thermodynamic, depending on calculating the equilibrium constants by different methods, which represented by Freundlich constant Kf, Langmuir constant (KL) and finally is described by Tempkin constant (TK). The results showed good consistency among the four sets of functions in terms of their values and physical meaning. This consistency gave good indication for the accuracy of such kind of calculation.
adsorption --- azo dye --- Adsorption isotherms --- Thermodynamic study.
Removal of reactive red dye (Cibacron Red FN-R) from simulated wastewater has been investigated as a function of solar advanced oxidation process. The photocatalytic activity using ZnO as a photocatalyst has been estimated. Different parameters affected the removal efficiency, including pH of the solution; initial dye concentration and H2O2 concentration were evaluated to find out the optimum value of these parameters. The results proved that, the optimal pH value was 8 and the most efficient H2O2 concentration was 100mg/L. Reduction of organic content for effluent solution was also monitored by measuring chemical oxygen demand (COD) to assess the degradation process. This treatment method was able to strongly reduce the organic content of reactive red dye-238 to 90% while the colour removal was 99%. It can be concluded, from these experiments, that the using of ZnO as a photocatalysis was exhibited as economical and efficient treatment method to remove reactive red dye-238 from aqueous solution by reducing its colour and COD value. Results were properly fitted to LH model.
تم دراسة عملية ازالة اللون لصبغة الازو الحمراء (Cibacron Red FN-R) من مياه مخلفات مصنعة في المختبر باستخدام عملية الاكسدة المتقدمة بالطاقة الشمسية. تم تقييم كفاءة التحفيز الضوئي لاوكسيد الخارصين عند استخدامها كعوامل مساعدة ومن ثم تقييم تأثير عدة عوامل والتي تشمل قيمة الاس الحامضي للمحلول وتركيز الصبغة الاولي وتركيز بيروكسيد الهيدروجين المضاف وذلك لإيجاد أفضل قيم لهذه العوامل . لقد تم التوصل الى ان أفضل قيمة للاس الحامضي للمحلول كانت 8 وأفضل تركيز لبيروكسيد الهيدروجين المضاف كانت 100 ملغم/لتر.تمت مراقبة نسبة الانخفاض في المحتوى العضوي للمحلول الخارج من المعالجة وذلك من خلال قياس المتطلب الكيميائي للاوكسجين COD لتقييم عملية تحلل الصبغة. وكانت هذه المعالجة قادرة على تقليل المحتوى العضوي للصبغة الفعالة الحمراء -238 بدرجة كبيرة تصل الى 90% بينما كانت نسبة ازالة اللون بحدود 99% . من التجارب العملية تم التوصل الى ان استخدام اوكسيد الخارصين كعامل مساعد لعملية التحفيز الضوئي يمثل طريقة معالجة كفوءة واقتصادية لازالة الصبغة الحمراء الفعالة-238 من المحلول المائي من خلال تقليل شدة اللون وقيم COD . كانت النتائج متطابقة مع موديل LH .
photocatalysis --- reactive dye --- zinc oxide --- azo dye
Decolorization of red azo dye (Cibacron Red FN-R) in simulated wastewater has been investigated as a function of solar photocatalytic process by using Fe3O4. Different parameters that affected on the removal efficiency, such as influent dye concentration, pH of dye solution, catalyst dosage, and H2O2 concentration, all these factors were evaluated to find the optimal operation conditions. Additionally, pH, ORP (oxidation reduction potential) and Ec (electrical conductivity) of the solution was monitored to assess the degradation of dye. From the experimental results, the desired pH value for solar photocatalytic Fe3O4 was 6.5 and the best catalysis dosage was 300mg/L. In addition, the most efficient H2O2 concentration was 200 mg/L for Fe3O4.The mathematical models that describe the photocatalytic process have been predicted by using response surface methodology (RSM). The decolorization efficiency of reactive red dye using Fe3O4 under solar radiation was around 85.51%.
photocatalysis --- Fe3O4 --- azo dye --- ORP --- reactive red.
Measurement calculations were carried out to determine the linear optical constants such as extinction coefficient, refractive index, average excitation energy and dispersion energy for the 3- amino-7-dimethylamino-2-methyl phenazine (Neutral red NR) doped Polyvinylpyrrolidone (PVP) film. Further the optical nonlinearities of Neutral Red : Polyvinylpyrrolidone solution have been investigated by Z-scan technique with CW laser at 657.2 nm The nonlinear refractive index and absorption coefficient are found to be in the order of - 1.91 ×10-9cm2/Watt , 1.13×10-4 cm/Watt, respectively .These results show that the ample has potential application in nonlinear optics.
حساب ثوابت الخواص البصريه المتمثله بمعامل الخمود ومعامل الانكسار وطاقة التهيج لصبغة نيوترل الحمراء المشوبه لفلم بولي فنيل بيروليدون PVP . بالاضافه الى حساب الخواص البصريه اللاخطيه للصبغه و بولي فنيل بيروليدون المحلول والتي تمت بواسطة تقنية المسح البصري لليزر النبضه المستمر بطول موجي قدره 657.2 نانومتر .وقد وجد ان معامل الانكسار اللاخطي ومعامل الامتصاص اللاخطي يساوي - 1.91 x-9 10 سنتمتر مربع/ الواط و1.13 x-4 10 سنتمتر/واط على التوالي. هذه النتائج أظهرت ان لهذه العينه تطبيقات في مجال البصريات اللاخطيه.
Optical properties --- nonlinear refraction index --- Z-scan --- azo dye
Azo dye was prepared from 4,4-diaminodiphenyl sulfone with chromotrpic acid by fox method. Azo dye was identified via IR-Infrared spectrophotometer, UV-visible spectroscopy and elemental analysis (CHN). The basic optical properties of azo dye have been studied at room temperature. The optical energy gap was estimated from the absorption coefficient values using Taue’s procedure. The values of the static refractive index , the static dielectric constant , oscillator energy , dispersion energy , the moments of optical dispersion spectra, and the band gap energy have been determined by the Wimple-Didomenico method .
تم في هذه الدراسة تحضير مركبات أزو جديدة ومن ثم جرى تشخيص المجاميع الفعالة باستخدام تقنيات عدة. درست الخواص البصرية للمركب الجديد بهدف التعرف على طبيعة منحني الامتصاصية والنفاذية والانعكاسية. استخدمت البيانات المستحصلة من القياسات في حساب الثوابت البصرية الخطية المختلفة وكذلك تم حساب معامل الانكسار ودراسة تغير قيمته نسبة الى التغير في الطول الموجي للضوء الساقط على العينة.أظهرت نتائج القياسات ان صبغة الأزو المحضرة ذات معامل انكسار عالي وكذلك ذات فجوة طاقة عالية نسبيا. أن فجوة الطاقة الضوئية لهذه الصبغة هي ضمن حدود فجوة الطاقة لاشباه الموصلات.
Azo dye --- Band gap energy --- Refraction index --- Oscillator parameters.
Listing 1 - 10 of 27 | << page >> |
Sort by
|